How to Overcome Samsung Galaxy J7 Prime Blank and Hang Logo (Bootloop)

This opportunity I want to review the problems that are often felt by Samsung J7 Prime users, where a common disease that occurs in this cell phone is blanking, aka the cellphone sails but does not get a picture (dark monitor).

Besides that, another common problem is the hang stuck symbol or what we often call bootloop.

In the case of the blank Samsung J7 Prime, it is possible at a glance that the problem we can guess is that there is damage to the LCD, but to determine it, further checks must be carried out.

Then why does this phone or any type/brand of phones with such common problems occur?

Generally this problem exists because it falls on the OS / Firmware system.

Let me briefly explain why such problems are common. So basically all cellphones are planned both in terms of hardware or firmware with certain capabilities according to the strength of the 2 elements.

This means that performance is balanced between the two elements, and we as users cannot do or force the phone to work beyond its capabilities.

If not, because of that the firmware or hardware will work really hard until the longer it falls or even the smartphone can die completely.

What can be updated next? Of course you can, although sometimes the price of service that needs to be spent is quite a lot if the damage to the device has entered the hardware area.

Then what if the damage that occurs is on the software side?

If there is damage to this section, therefore I say congratulations. Because at least we can handle it ourselves or give it to the experts, no need to spend a lot of money.

For this reason, I have arranged this article, and hope to be able to deal with problems on your cell phone which was destroyed due to the above problems.

Table of contents

- 1 How to deal with Samsung Galaxy J7 Prime Blank (Dark Monitor)

- 1.1 First Way

- 1.2 2nd Way

- 2 Ways to deal with Samsung J7 Prime Hang Symbol (Bootloop)

- 3 Handling Samsung j7 Prime bootloop without PC

- 4 Handling Samsung j7 Prime bootloop with PC

- 4.1 Some materials

- 4.2 Way 1

- 4.3 Method 2

How to deal with Samsung Galaxy J7 Prime Blank (Dark Monitor)

The moment before we sent the verdict to the hardware location. Therefore we will try two ways and hopefully can deal with the problem on this side of the damage.

First Way

Bila Samsung j7 prime Kamu pada kondisi lcd blank tetapi mesin masih terdengar suara, baik itu saat di cas atau saat di telepon. Karena itu yang pertama yang dapat Kamu coba dengan merestart ponsel tersebut.Baca : Cara Bypass Account Google HP Samsung A10/A20 di Android 10 Tanpa PC dan Program

Untuk cara ini kemungkinan Kamu telah memahami dan dapat lakukan tanpa tutorial. Tetapi bila rupanya dengan merestart ponsel tidak membantu, karena itu coba cara berikut ini.

2nd way

In the next method, do a forced reboot. This method is actually quite simple, but probably not everyone knows it.

First, make sure the phone is off / off. Then enter download mode by pressing the Volume down button + Home button and Power button simultaneously until the phone glows like this:

On the monitor you can see that when you press the volume up button, we will automatically be directed to the Download model, if you press the bottom button the phone will reboot. For this time, please press the bottom button until the phone automatically restarts.

Wait a moment and usually the cell phone monitor will glow as usual. This method has been applied and can be proven successful, please try it.

Another way, you can also try rebooting the phone as above but this time when the phone is turned off, please press only the Power button and the Volume down button at the same time.

This method can sometimes treat a Samsung j7 prime phone whose monitor state is blank black.

However, if the method above is still the problem has not been resolved, then it is possible that the problem is on the hardware side, especially on the LCD. For this one, you need someone who is an expert in that area.

How to deal with Samsung J7 Prime Hanging Symbol (Bootloop)

Just as I explained above, if you experience this kind of case, because of that the chance of damage occurs in the software section, generally a fall occurs because the mechanism on the cellphone is working beyond its capabilities.

For example, doing a lot of installing programs until the phone is not strong enough to load the specified maximum ram, or forcing the phone mechanism to work while playing games that are actually beyond the power of the cell phone mechanism.

Although quite a lot of the problems are in the hardware, in this case the most common problems are on the emmc side.

But that's not what we want to review in this article, we will optimize first on the software/firmware section.

Nach, to deal with the J7 prime phone that hangs on this symbol, there are two ways that we want to do and review. Jump to the first method.

Handling Samsung j7 Prime bootloop without PC

To deal with that problem, we can try to do a hard reset on this Samsung j7 prime. Read: Handling Guide Xiaomi Redmi 4 Prime [MARKW] Locked Mi Account

The trick, please turn off the cellphone first, make sure the place is completely off. Then enter recovery mode by pressing the volume up button, home button and power button simultaneously.

If there is an update mechanism or when on the screen there is an image of a robot and a yellow great sign, please just wait until the phone actually goes into android recovery like this:

Then to start doing a hard reset, switch to the Wipe data/factory reset menu using the volume down button and click OK by pressing the power button.

Then a verification page will open, please specify "yes" and press the power button again to reset the cellphone.

If the reset has been successful, restart the phone by specifying the Reboot system now menu in the first line, pressing the power button and the phone will restart.

If the phone successfully enters the special settings menu, it means that this method has successfully handled your bootloop Samsung j7 Prime.

Then just follow the initial settings such as choosing the language, location to the final settings as usual.

If this method still doesn't work, then please try this last method.

Handling Samsung j7 Prime bootloop with PC

If we initially did it with a hard reset, therefore in the following method we will try to deal with the problem by flashing while upgrading the firmware to Android Oreo using the Odin tool.

In this method you must have equipment such as a PC / Netbook and an original data cable. In addition, you must take the following materials:

Some ingredients

- Samsung J7 Prime Firmware SM-G610F_G610FDXU1CRL1_G610FOLE1CRL1_XID_8.1.0.zip

- Odin can be taken in this article

- Samsung USB Driver in this article

Please prepare all the above materials on your PC/Netbook, for the firmware and Odin please concentrate and the Samsung USB Driver must be installed on the Netbook. If so, we can move on to the next stage.

Method 1

Please turn off the phone, and enter into Download mode. The trick is like just now by pressing the combination of the Volume Up + Home + Power buttons simultaneously.

There will be a warning, please press the volume up button to enter the download mode, until later this will be.

Next, connect the phone to the PC via a good data cable, and leave it still connected, don't unplug it first.

Method 2

If the phone is connected, then please concentrate on the Samsung J7 Prime ROM/Firmware file. Read: Final Sensor Redmi 4x Santoni, the way out Cannot Enter Mi Cloud Account

When the concentrate process has finished, then open the Odin3 program/tool ​​that has been concentrated previously.

If you extract the firmware, there is only one file, so the suggestion for that file is by clicking on the AP menu in the Odin, and pointing it to the firmware file.

But if the concentrate results are four files, then it is the same according to the position of each name.

BL menu to file BL_ G610FDXU1CRL1_G610FOLE1CRL1xxxx.tar.md5, then AP to AP_ G610FDXU1CRL1_G610FOLE1CRL1xxxx.tar.md5.

Likewise, everything else is sorted according to the code in the Odin menu.

Until when everything is entered it will look like this:

If so, please make sure the driver has been identified. You can see the characteristics in Odin, which I gave an arrow sign. If it has been identified, it can be seen/readable (COMX) which red letters can be in the form of any number.

Next do the flashing by clicking the Start button until the flashing process will run like this:

Make sure the process bar continues without errors, please wait until the flashing of the Samsung j7 prime is over, the process will be quite long especially when Odin is copying the userdata file and the system.

When it's finished, there will be a PASS notification in Odin like this:

And at that time the phone will restart automatically, until here you can take the data cable that is connected to the PC.

Please wait for the phone to do some updates of this kind:

Furthermore, if the process goes smoothly, the phone will boot and enter the initial setup. Please do the setup until the phone can enter the special menu successfully.

If in this way your phone glows again, because it has been confirmed that the damage to the cellphone is in the software section. But if you get to this latest method, the phone doesn't recover, because it's likely that there's a hardware problem.

Although this can be circumvented by carrying out the EMMC and doing a direct program to the emmc, the costs you want to spend are still quite large. Generally, between 400 and 600 thousand you have to prepare.

Until this stage, therefore I hope the problem with your phone can be resolved and you can use the phone normally again. And until here the article deals with the Samsung Galaxy J7 Prime blank and hangs, my symbol is closed until here. Hopefully useful.